Skip to main content

PUBLICATIONS

Journal Publications


Thatcher, C., Adams, B. (2021) “Impact of Surface Reflection on Microbial Inactivation in a UV LED Treatment Duct,” Chem. Eng. Sci., 230, doi.org/10.1016/j.ces.2020.116204

Gunnarsson, A., Andersson, K., Adams, B., Fredriksson, C. (2020) “Discrete-Ordinates Modelling of the Radiative Heat Transfer in a Pilot-Scale Rotary Kiln,” Energies, 13, 2192; doi.org/10.3390/en13092192

Schroedter, T., Adams, B., Tuia, J., Fry, A. (2020) “Development of a High Pressure Dry Coal Feed System for a 100 kWt Oxy-Coal Reactor,” J. Energy Resour. Technol., 142(7): 072304, doi.org/10.1115/1.4046602

Williams, T., Adams, B., (2020) “A Dimensionally Adaptive Technique for Computationally Efficient Cylindrical Discrete Ordinates Radiation Calculations,” J. Quant. Spectrosc. Radiat. Trans. 243, doi.org/10.1016/j.jqsrt.2019.106819

Gunnarsson, A., Andersson, K., Adams, B., Fredriksson, C. (2020) “Full-Scale 3D-Modelling of the Radiative Heat Transfer in Rotary Kilns with a Present Bed Material,” Intl. J. Heat Mass Trans. 147, doi.org/10.1016/j.ijheatmasstransfer.2019.118924.

Williams, T., Adams, B., (2019) “Dimensionally adaptive techniques for computationally efficient discrete transfer radiation calculations,” J. Quant. Spectrosc. Radiat. Trans. 233, 67–75, doi.org/10.1016/j.jqsrt.2019.05.007.

Adams, B., Hosler, T. (2019) “Pressure and particle property impacts on radiation in oxy-coal combustion,” Fuel 239, 667–676, doi.org/10.1016/j.fuel.2018.11.042.

Tree, D., Tobiasson, J., Egbert, S., Adams, B. (2019) “Measurement of Radiative Gas and Particle Emissions in Biomass Flames,” Proc. Combust. Inst. 37 (4), 4337-4344, doi.org/10.1016/j.proci.2018.06.221.

Tobiasson, J., Egbert, S., Adams, B., Tree, D. (2018) “An Optical Method for the Measurement of Combustion Gas Temperature in Particle Laden Flows,” Exp. Therm. Fluid Sci. 98, 704-711.

Adams, B., Tobiasson, J., Egbert, S, Tree, D. (2018) “Determining Total Radiative Intensity in Combustion Gases Using an Optical Measurement,” Energy Fuels 32 (2), 2414–2420.

Smith, J., Adams, B., Jackson, R., Suo-Anttila, A. (2017) “Use of RANS and LES Turbulence Models in CFD Predictions for Industrial Gas-fired Combustion Applications,” Industrial Combustion,  Journal of the International Flame Research Foundation, Article 201607, ISSN 2075-3071.

Conference Proceedings


Lawless, Z., Cable, A., Van Dyke, C., Adams, B. (2021) “User Guide for Dust Modeling Using CMAQ 5.3.1 and WRF 4.2.1,” Faculty Publications. 5515. https://scholarsarchive.byu.edu/facpub/5515, ISSN 2572-4479.

Williams, T., Adams, B. (2019) “Improvement of Computational Efficiency for Discrete Ordinate Radiation Calculations Through the Use of Dimensionally Adaptive Mesh Techniques,” Paper #915-0088, Western States Section of the Combustion Institute - 2019 Fall Technical Meeting, Albuquerque, NM.

Adams, B., Schroedter, T. (2019) “Modeling Pressurized Dense Phase Coal Fluidization and Transport,” POWER2019-1874, Proceedings of the ASME 2019 Power Conference, POWER2019, July 16-18, Snowbird, Utah. (peer reviewed)

Gunnarsson, A., Andersson, K., Adams, B. (2019) “Heat Transfer Modelling of Industrial Rotary Kilns for Iron Ore Pelletizing,” Paper #159, The 44th International Technical Conference on Clean Energy (Clearwater Clean Energy Conference), Clearwater, Florida.

Adams, B., Schroedter, T., Tuia, J., Fry, A. (2019) “Modeling and Bench-scale Testing of a High Pressure Dry Coal Feed System for Oxy-combustion,” Paper #139, The 44th International Technical Conference on Clean Energy (Clearwater Clean Energy Conference), Clearwater, Florida.

Williams, T., Adams, B. (2019) “Discrete Transfer Radiation Calculations with a Dimensionally Adaptive Mesh,” Paper #77, The 44th International Technical Conference on Clean Energy (Clearwater Clean Energy Conference), Clearwater, Florida.

Williams, T., Adams, B. (2019) “Improvement of Computational Efficiency for Discrete Transfer Radiation Calculations Through the Use of Dimensionally Adaptive Mesh Techniques,” 11th US National Combustion Meeting, March 24-27, Pasadena, CA.

Gunnarsson, A., Andersson, K., Adams, B. (2018) “Full Scale 3D-Modelling of the Radiative Heat Transfer in Rotary Kilns with a Present Bed Material,” Paper #50, The 43rd International Technical Conference on Clean Energy (Clearwater Clean Energy Conference), Clearwater, Florida.

Hosler, T., Adams, B. (2018) “Particle Property Impacts on Radiation in a Pressurized Oxy-Coal Combustor,” Paper #49, The 43rd International Technical Conference on Clean Energy (Clearwater Clean Energy Conference), Clearwater, Florida.

Schroedter, T., Adams, B. (2018) “Modeling Transport of Pressurized Dense Phase Coal,” Paper #48, The 43rd International Technical Conference on Clean Energy (Clearwater Clean Energy Conference), Clearwater, Florida.

Gunnarsson, A., Andersson K., Adams, B. (2018) “3D-Modelling of the Radiative Heat Transfer in Rotary Kilns with a Present Bed Material,” Eurotherm 110, Computational Thermal Radiation in Participating Media VI, Cascais, Portugal. (peer reviewed)

Adams, B. (2017) “Mitigation of Airborne Pollutants in Coal Combustion, Use of Simulation,” Fossil Fuels, Encyclopedia of Sustainability Sci. Technol., 2nd Ed., Springer, ISBN 978-1-4939-2775-3, DOI 10.1007/978-1-4939-2493-6_959-1. (invited)

Smith, J., Adams, B., Jackson, R., Suo-Anttila, A. (2017) “RANS vs LES CFD for Gas-fired Combustion Equipment Analysis,” AFRC 2017 Industrial Combustion Symposium, Houston, TX.

Hosler, T., Adams, B. (2017) “Impact of Particle Properties on Radiative Heat Flux in an Oxy-Coal Reactor,” Paper # 29OT-0033, Western States Section of the Combustion Institute - 2017 Fall Technical Meeting, Laramie, WY.

Schroedter, T., Adams, B. (2017) “Modeling a Pressurized Coal Feed System,” Paper # 29OT-0031, Western States Section of the Combustion Institute - 2017 Fall Technical Meeting, Laramie, WY.

Williams, T., Adams, B. (2017) “A Fast-Running Simulation Tool for Axisymmetric Oxy-Coal,” Paper # 29CC-0032, Western States Section of the Combustion Institute - 2017 Fall Technical Meeting, Laramie, WY.

Adams, B., Fry, A., Tree, D. (2017) “Technology Development for a Pressurized Dry Feed Oxy-Coal Reactor – Program Overview,” The 42nd International Technical Conference on Clean Energy (Clearwater Clean Energy Conference), Clearwater, Florida.

Adams, B., Sperry, R. (2017) “Impact of Computational Mesh on CFD Combustion Predictions,” Paper 40b, 2017 Spring Meeting and 13th Global Congress on Process Safety, AIChE, ISBN: 978-0-8169-1098-4.